Material Safety Data Sheet
MSDS - Epoxy Polyester Powder Coatings
For More Information Click Here
SECTION 1: MATERIAL IDENTIFICATION AND APPLICATION

Material Name : Neat Koat Powder Coating

Manufacturer’s Name: Neat Koat Speciality Inc. Supplier’s Name: Neat Koat Speciality Inc.
Address: Plot No. 8, Survey No. 245, Opp. Sarvoday School Lane, Shapar (Veraval), Dist. Rajkot, Gujarat, INDIA. Address: Plot No. 8, Survey No. 245, Opp. Sarvoday School Lane, Shapar (Veraval), Dist. Rajkot, Gujarat, INDIA.
Chemical Name: Epoxy Polyester Powder Coating Product Application: Powder Coating Painting
SECTION 2: HAZARDOUS INGREDIENTS

Barium Sulphate : 10 – 25 %
Resin, Additives : 50 – 60 %
Titanium Dioxide : 5 – 25 %

SECTION 3: PHYSICAL DATA

Physical form : Solid Powder
Odour & Appearance : Not Applicable
Specific Gravity : 1.2 – 1.7
Boiling Point : Not Applicable
Water Solubility : In soluble
Evaporation rate : Not Applicable
Particle Size : < 120 um, 100% Passing

SECTION 4: FIRE AND EXPLOSION DATA

Flammability : No / Yes, yes in presence of open flame, spark, or other source.

SECTION 5: REACTIVITY DATA

Chemical Stability : Stable
Reactivity under what conditions : Non reactive under ambient conditions.
Hazardous Decomposition products: In complete combustion can produce carbon monoxide and dioxide, acids and aldehydes.

SECTION 6: TOXICOLOGICAL PROPERTIES

Skin Contact : Non Hazardous
Skin Absorption : Not Applicable
Eye Contact : Irritation
Inhalation Acute : Not Available
Ingestion : Not Available
Effect of Exposure : Not Available

SECTION 7: PREVENTIVE MEASURES

Personal preventive measures:
Gloves : Plastic
Respiratory : Face Mask
Eye : Protective Glass
Foot Ware : Industrial Shoes
Clothing : Cotton Clothing
Other : NIL

Engineering Control : Adequate ventilation, Dust control during application is recommended.

Leak or Spill Procedure: Collect in to tray or vacuum clean

Waste Disposal : In Notified area.

Storage Requirements: At Ambient in a shed and ventilated location and away from source of ignition or fire.

SECTION 8: FIRST AID AND MEASURES

Eye contact : Flush with plenty of clean water for at least 15 minutes and take medical care.
Skin Contact : Wash with water and soap.
Ingestion : Seek medical attention
Inhalation : Seek medical attention

Prepared By : Technical Director
Prepared on : March 15 2007
Disclaimer : Information contained in this material safety data sheet is believed to be reliable and given in good faith, but no representation, guarantee or warranties of any kind are made as to its accuracy, suitability for a particular application or results to be obtained from them. The user of this material decides what safety measures are necessary to safely use this material, either alone or in combination with other materials. Asian Paints Industrial Coatings Limited makes no warranties
expressed or implied in respect of the adequacy of this document for any particular purpose.